Basic information on plastic caps

One of the most common products through the dip molding process are the CAP. These caps are known for their flexibility, as they can be used in many ways. They are most often used to protect or improve the design or the duration of the various components and products.

One of the best advantages of using plastic caps is that they are very flexible. Can be used in various applications with variations in size. It should not be an exact fit on its application, but is still able to provide an airtight seal. The production of caps and plugs through dip molding is also cheaper, which is one reason why most industries prefer to use the CAP. If the production is high or low volume, the cost is even lower. The entire production process the CAP is very economical, regardless of the volume of products manufactured. This is very beneficial for both producers of caps and plugs s as well as the industries that buy them for different purposes and applications.

The plastic is a very general term, because there are actually several types of plastic. All these plastic materials used to make the caps have properties that make them resistant to various damages like splitting and crushing. The different types of plastic materials also provide highly adequate electrical isolation. Plastic caps also come in a variety of colors. Can be produced in many different colours according to the specifications provided by its customers. The surfaces of plastic caps also have different finishes or glossy free stitching.

Plastic end caps can be made in various sizes and dimensions. There are ear plugs and Sockets with different diameters for different applications. They come in different lengths, there is always a plastic cup that you can use for whatever purpose you may have. Plastic caps also have different sizes when it comes to their thread protection. Manufacturers produce large caps and plugs and not just small. Large plastic plugs are commonly used in the oil industry as in the construction industry. Pipe ends can be fitted to protect them while they are transported to their destination.

DIP molding is a great way to Cap production. This is because the molding process of dip is very economical and is also capable of producing large volumes of Cork in a very short time compared to other manufacturing processes used to make the plugs and Sockets.